Foil Drive Universal Mini Pod

Foil Drive Universal Mini Pod

The Foil Drive Universal Mini Pod is a low-drag, toolless motor pod for riders who want a cleaner and more efficient Foil Drive setup without committing to an integrated mast.

It uses a smaller, more streamlined pod shape to reduce wetted surface area, drag and turbulence around the motor. In real terms, that means smoother surface motoring, easier take-offs, cleaner touchdowns and a ride feel that sits much closer to an integrated mast, while still being fully removable and adaptable across compatible masts.

For riders already using Foil Drive and looking to refine their setup, this is one of the most practical upgrades available. It makes mast swaps quicker, reduces the amount of hardware involved and helps the motor feel less intrusive once you are up and riding.

Who Is It For?

The Universal Mini Pod is best suited to Foil Drive riders who want a more performance-focused universal mounting option. It makes particular sense for surf foil, wing foil, downwind, prone, pump training and flat water riders who want to reduce drag and make their assist setup feel cleaner on the water.

It is also a good choice if you use more than one mast and want to move your motor between setups quickly. Once the Inner Pod has been mounted to the motor, the toolless strap and latch system allows the pod to be attached or removed in seconds.

It may not be the right product if you are using an older fixed-cable motor, or if your mast falls outside the stated strap dimensions. If you are unsure, please contact The SUP Company before ordering and we can help check compatibility.

Why Choose the Universal Mini Pod?

• Low-profile pod shape reduces drag compared with larger universal mounts.
• Toolless snap-on latch system allows fast fitting and removal.
• Three strap sizes included for wide mast compatibility.
• Seven-position ladder adjustment helps fine-tune strap tension.
• Improves surface motoring, motor traction, take-off feel and touchdown recovery.
• Fully removable, so you keep the flexibility of a universal setup.
• A cost-effective upgrade if you want some of the feel of an integrated mast without buying a dedicated mast.

Compatibility

The Foil Drive Universal Mini Pod is compatible with V2 Motors with a removable cable. The Inner Pod mounts directly to the V2 Motor using the four supplied M4 x 16mm bolts.

It is designed to fit almost every mast on the market using three included strap sizes and a seven-position ladder adjustment system. The strap size is selected based on the chord width, which is the widest point of your mast.

Small strap	95–110mm mast chord width
Medium strap	112–128mm mast chord width
Large strap	130–145mm mast chord width

Most masts use the Medium strap. If your mast is outside these dimensions or has an unusual shape, we recommend checking fitment before purchase. You can contact us for advice or visit one of our stores for help with compatibility.

Installation Notes

The Mini Pod is almost completely toolless in day-to-day use. The only tool-based step is the initial one-time mounting of the Inner Pod to the motor using the supplied M4 x 16mm bolts. Once that has been done, the strap and latch system allows the pod to be attached and removed from the mast without tools.

The included Mast Cable Guide helps route the motor cable neatly along the mast. You will also need electrical tape or similar to secure the motor cable to the mast. Tape is not included.

Performance Benefits

The biggest benefit of the Universal Mini Pod is reduced drag. By making the pod smaller and cleaner through the water, it helps the Foil Drive system feel less like an add-on and more like part of the foil setup.

Riders can expect smoother surface motoring, improved motor traction, easier take-offs and cleaner recovery after touchdowns. This is especially useful in surf, chop, downwind bumps or technical riding where pod contact and drag can otherwise interrupt flow.

Universal Mini Pod vs Standard Universal Motor Pod

Universal Mini Pod	Best for riders wanting lower drag, faster mast swaps and a cleaner, more performance-focused ride feel.
Standard Universal Motor Pod	Best for straightforward universal mounting and riders who do not need the lower-profile performance benefits of the Mini Pod.
Integrated Mast	Best for the cleanest possible setup, but with a higher cost and less flexibility if you want to move the motor between different masts.

Specifications

Product	Foil Drive Universal Mini Pod
SKU	FD283
GTIN	9361123003233
Install type	Toolless instant-latching system after one-time Inner Pod motor installation
Motor compatibility	Foil Drive V2 Motors with removable cable
Strap sizes included	Small 95–110mm, Medium 112–128mm, Large 130–145mm
Adjustment	Seven-position ladder adjustment system
Pod material	Injection-moulded ABS Inner and Outer Pod
Strap material	EPDM rubber reinforced with Aramid fibre
Best for	Surf foil, wing foil, prone, downwind, pump training and performance Foil Drive use

What’s Included?

• 1 x Outer Pod with internal rubber insert
• 1 x Inner Pod
• 3 x Pod Straps: Small, Medium and Large
• 4 x M4 x 16mm bolts for mounting the Inner Pod to the motor
• 1 x Mast Cable Guide

Please note: Electrical tape or similar is required to secure the motor cable to the mast and is not included.

Useful Links

• Shop all Foil Drive products
• Foil Drive Universal Motor Pod
• Foil Drive Gen2 V2 Motor
• Foil Assist Explained: Foil Drive vs Duotone vs Waydoo

Watch: Foil Drive Gen 2 Walkthrough

For a wider look at the Foil Drive Gen 2 system, watch our SUP Company walkthrough with Dominic Hoskyns below.

FAQs

Will the Universal Mini Pod fit my mast?

The Mini Pod is designed to fit almost every mast on the market. It includes three strap sizes: Small 95–110mm, Medium 112–128mm and Large 130–145mm. These are measured against the chord width, which is the widest point of your mast. Most masts use the Medium strap. If your mast sits outside these dimensions or has an unusual shape, please contact us before ordering.

Which motors is the Mini Pod compatible with?

The Universal Mini Pod is compatible with Foil Drive V2 Motors with a removable cable. The Inner Pod mounts directly to the V2 Motor using the four included M4 x 16mm bolts.

Do I need tools to install it?

You only need tools for the initial one-time mounting of the Inner Pod to the motor. After that, the strap and latch system is toolless, allowing you to attach or remove the pod from your mast in seconds.

Do I need to tape my motor cable to the mast?

Yes. The included Mast Cable Guide helps route the motor cable neatly, but you will need electrical tape or similar to secure the cable to the mast. This helps keep the setup tidy and reduces vibration. Tape is not included.

How do I know which strap size to use?

Measure the chord width, which is the widest point of your mast. Use the Small strap for 95–110mm, Medium for 112–128mm and Large for 130–145mm. Most masts use the Medium strap. The printed side of the strap should face away from the mast when installed.

What performance improvement should I expect?

The smaller pod profile reduces wetted surface area compared with traditional universal mounts. This lowers drag and turbulence around the motor, helping with smoother surface motoring, better motor traction, easier take-offs and cleaner touchdowns.

Is this better than an integrated Foil Drive mast?

An integrated mast is still the cleanest and most efficient option, but it is a bigger investment and is less adaptable if you want to use multiple masts. The Universal Mini Pod is a very practical middle ground, giving a more refined ride feel while remaining removable and versatile.

Can The SUP Company help me check compatibility?

Yes. Send us details of your Foil Drive motor, cable type, mast brand and mast measurements, and we can help advise before you buy.